nekos KATO - DECLARATION of INCORPORATION (for a Partly Completed Machine) and EC DECLARATION of CONFORMITY

38
17. DECLARATION OF INCORPORATION (for a partly completed machine) AND EC
DECLARATION OF CONFORMITY
Hereby the
Manufacturer:
Nekos Srl
Via Capitoni 7/5- 36064 Colceresa – VI – Italy
Tel +39 0424 411011 – Email info@nekos.it
declare under its own responsibility that the following products:
Product
Designation:
Window chain drive
Type :
230 V : KATO 253 - KATO - KATO 305
KATO SYNCRO
3
- KATO 305 SYNCRO
3
INKA 356 - INKA 356 SYNCRO
3
24 V : KATO 253 - KATO - KIMO - KATO 305
KATO SYNCRO
3
- KATO 305 SYNCRO
3
INKA 356 - INKA 356 SYNCRO
3
Year of manufacturing from: 2017
Fulfil the essential requirements of the Machinery Directive 2006/42/EC, Annex I,
Art. 1.1.2, 1.1.3, 1.1.5, 1.2.1,1.2.3, 1.2.6; 1.3.2, 1.3.4, 1.3.9, 1.5.1, 1.5.2, 1.5.6, 1.5.7, 1.5.8, 1.5.9, 1.5.10, 1.5.11,
1.7.1, 1.7.1.1, 1.7.3, 1.7.4.2, 1.7.4.3
The relevant technical documentation is compiled in accordance with Annex VII, Part B
The person authorised to compile the relevant technical documentation is: ing. Matteo Stefani – Nekos S.r.l.
In response to a reasoned request by the national authorities, we will provide, via e-mail, the relevant information on
the product listed above within an adequate period proportional to its importance.
Furthermore the products listed above complies with the provisions of followings Directives :
 2014/30/EU ElectroMagnetic Compatibility Directive (EMCD)
 2014/35/EU Low Voltage Directive (LVD)
 2011/65/EU Restriction of the use of certain hazardous substances Directive (RoHS Directive)
 2015/863/EU Delegated Directive amending Annex II of Directive 2011/65/EU of the European Parliament and
of the Council regarding the list of substances with usage restrictions
and of the following harmonised standards and/or technical specifications:
EN 60335-2-103 ; EN 61000-6-3:2007 + A1:2011 + AC:2012; EN IEC 61000-6-2:2019
EN 60335-1:2012 + AC:2014 + A11:2014; EN 50581:2012
Commissioning of the complete machinery including the above mentioned drives delivered by us is not allowed until it
is ascertained that the installation of the complete machinery was performed in accordance with the specifications and
the operating and installation advice given in our Mounting Instructions, and that the acceptance procedure was duly
carried out and documented in an acceptance protocol by a specialist.
This is declared by the manufacturer:
NEKOS SRL - Via Capitoni 7/5 - 36064 Colceresa – VI – Italy
Represented by: Giuliano Galliazzo – President CEO
Place and date: Colceresa 04/03/2020 Valid signature
57
NEKOS S.r.l. - Via Capitoni, 7/5
36064 Colceresa – VI – ITALY
+39 0424 411011 –  +39 0424 411013
www.nekos.it info@nekos.it