Need help?Do you have a question about the Nemaxx P6 and is the answer not in the manual?
General| Type | Pellet Stove |
|---|---|
| Nominal Heat Output | 6 kW |
| Efficiency | 85% |
| Fuel | Wood Pellets |
| Hopper Capacity | 13 kg |
| Exhaust Diameter | 80 mm |
Key technical specifications and performance metrics for the pellet stove models.
General guidelines and requirements for connecting the stove to a chimney and ventilation system.
Visual guide and instructions for properly connecting the stove's flue to the chimney.
Requirements for protecting flammable floor surfaces from heat and ash.
Specifies minimum clearances from the stove to combustible materials.
Instructions for connecting the stove to the power supply and its electrical consumption.
Guidelines for providing external air for combustion, including pipe types and diameters.
General guidance for operating the stove, referring to controls and figures.
Step-by-step instructions for turning the pellet stove on and off.
How to adjust the heating output levels (P1-P4) for desired heating.
Explanation of the energy-saving Eco modes.
How to set the target room temperature for the stove's operation.
Instructions for switching between automatic and manual operating modes.
Overview of the setup menu and how to navigate it for various settings.
Detailed steps for adjusting fan speeds for different operational stages.
Procedure for setting the stove's internal clock and time.
How to configure the automatic cleaning intervals for the burn pot.
Instructions for programming weekly on/off schedules for the stove.
Guide to selecting the display language for the stove controls.
How to select between Eco 1 (stop) and Eco 2 (minimum power) modes.
Procedure to reset the stove's settings to factory defaults.
Codes E1 (fire out) & E2 (igniter failure).
Codes E4, E5, E6 for temperature/vacuum issues.
Codes E7 (power), E8 (cleaning), ESC/ES01-03 (sensor issues).
Handling power interruptions and reset procedures.
Protection against overcurrent with main fuse details.
Overheating protection and low temp switch off via sensors.
Instructions for using the handle for cleaning the fire pan and loosening pellets.
Daily cleaning procedure for the fire pan and surrounding areas.
Annual cleaning of internal flue pathways to remove ash buildup.
Step-by-step visual guide for accessing and cleaning internal stove components.
Instructions for cleaning the convection blower and the exhaust venting system.
Step-by-step guide for replacing the ignition bar and auger system.
Instructions for replacing the room circulation fan or blower.
Guide for replacing the combustion fan motor.
Details product ID, intended use, manufacturer, and representative.
Summarizes key features like mechanical strength, durability, and fire safety.
Details thermal output, heating range, and operational efficiency.
Identifies test body, subject, customer, fuel, and scope of testing.
Provides a summary of test findings and general design of the appliance.
Lists key performance data at nominal and partial heat outputs.
To Next Page
