13
Version: 9a
13.11.2018
EN
ON/OFF
1. Turning the heater on and o is performed with the ON/OFF button
.
After switching on, the message, „CLEANING“
will be shown in order to clean the re pot.
2. After rst phase „Cleaning“, the word „Lighting“
will be shown on the display.
During this phase the pellets will be loading in
the burn pot.
This state remains up to when the smokes
temperature doesn’t exceed the planned
threshold.
3. When the Lighting phase is nished, some
minutes will be necessary for the ame
stabilization.
This phase is shown by the word
„STABILIZATION“ which will stay indicated on
the display and will indicate the maintenance
phase of the achieved operational status.
4. For turning o, push .
The display will show:
5. After the temperature in the stove is cold
enough, the word ‚GOODBYE’ is displayed.
To Next Page
Loading...
