11
Version: 9a
13.11.2018
EN
Put wood pellet fuel into the hopper, connect the power. Then On/O Light is lit (It means that power
is on).
Follow instructions in section “start and operation”
NOTE:
During rst time running, the paint may burn. This may cause unpleasant smell.
Please open the window and door for ventilation.
NOTE:
Before rst usage it is necessary to put a handful of wood pellet to the re pot.
NOTE:
The re pot and underneath the re pot must be clean every time you start the stove!
5. OPERATION
ALL NATIONAL AND LOCAL REGULATIONS AND EUROPEAN STANDARDS SHALL BE
COMPLIED WITH WHEN OPERATING THE APPLIANCE
ATTENTION: When the stove is in operation, please don‘t touch the front. It is extremely hot!
To Next Page
Loading...
