Nemaxx P6 - System Interruption & Cleaning Errors

24
Version: 9a
13.11.2018
ATTENTION!!!
If showing following words when you start the stove:
EN
During the operation, the stove is interrupted by
power cut.
It means you need to clean the stove.
If everything is ne, you can press to delete the Error code.
It means temperature sensor 1(exhaust gas
temperature sensor) - short-circuit.
It means temperature sensor 2
(safety temperature sensor below the hopper)
- short-circuit.
It means temperature sensor 3 (sensor for testing
the room temperature, which is located on the rear
panel)
- short-circuit.
It means temperature sensor 1 is open-circuit.
It means temperature sensor 2 is open-circuit.
It means temperature sensor 3 is open-circuit.