13
Network Camera Installation Manual
Monitor/intercom – Listen to the audio of the camera.
Talk – Talk back to the camera for two way audio
Snapshot – Take picture of the screen and store on camera's memory.
Record – Record video of the live view and store on camera's memory.
Alarm on – Turn on alarm.
Preset – Tap on the icon to point the camera to preset position.
Set position on pan and tilt camera by pressing and hold for 3 seconds.
IR light – Turn on IR LED light.
Up-down flip – Flipping image up side down.
Right & left – Used in pan and tilt camera for moving camera right and left.
VGA – Resolution settings; QVGA, VGA, 720P(only for HD camera),
1080P(only for 1080P camera)
Environment mode - Set 50Hz (Europe) or / 60 Hz(USA)
8. Parameter settings
Choose camera and Tap“ ” located on the right of the camera list. Then tap on edit
camera to modify user name, password, advanced setting, alarm setting and time setting.
Fig 8a Fig 8b Fig 8c
8.1 Modify the password of the camera
Tap the "Modify Security code" in the "Advanced Settings", and Change Password.
Fig 8.1a
Fig 8.1b
To Next Page
Loading...
Need help?
General