14
Network Camera Installation Manual
Fig 8.2a Fig 8.2b
Fig 8.3 Fig 8.4
8.2 WIFI Settings
In the “Advanced Setting”, Tap “Manage WIFI networks”, select your WIFI router you want
to connect the camera to. Then input password of the WiFi router. After successful setting,
camera will reboot. After reboot, LAN cable can be unplugged.
8.3 Record Setting
In the record settings, you can
select full time recording or alarm
event(motion detection) recording.
8.4 Alarm Setting
In the “Alarm Setting”, turn off guard switch and
open “alarm linkage(PIR)” to turn on motion
detection by PIR sensor only. Alarm SD card
recording and push notification can be turn on or off.
To Next Page
Loading...
Need help?
General