3
Network Camera Installation Manual
1.4 WiFi Connection using “one key setup.”
Fig 1.4a Fig 1.4b Fig 1.4c
Fig 2.1a Fig 2.1b Fig 2.1c
Plug in the power adapter to the camera. The camera head will rotate to initialize
for about 10 seconds. For the first time installation, after downloading and installing
“coolcamHBP” app, tap on add camera and tap on “one key setup wifi” icon or
choose skip (only if camera wifi setup is done.)
While the camera gives a ring tone sound, choose WiFi router from the list which you
want to connect the camera to. Then, input Wi-Fi password and tap on “one key
setup wifi.” Normally it takes about 40 seconds for the camera to connect to your
Wi-Fi router. When it is done, you will hear a short burst of ringing sound.
2. iPhone and Ipad App introduction
2.1 App download
From App Store, search for app name “coolcamHBP”, and then choose “ ”
to download and install it.
To Next Page
Loading...
Need help?
General