Connection Settings8.11
Connection to the Postal Services or Online Services
To add funds or access Online Services, the Mailing System can use the following networks:
•
An analog / fax telephone line through an analog modem
•
An Internet access through a high speed LAN (Local Area Network).
First use the procedure below to select the connection, then configure the connection.
LAN settings can only be performed if the machine was actually
connected to the LAN at power-up.
See also
•
To physically connect a modem or the LAN to the base, see Connection Diagram on
page 21 .
How to Set the Postal/Online Services Connection
To set the postal/Online Services connection:
1. As supervisor (see How to Log in as Supervisor on page 126 ):
Press and type 9.1 or select the path:
Communication settings Type of connection
The Server Access screen is displayed.
2. To use the analog telephone line modem, select Modem and press [Ok] (or type 1 ).
To use the LAN, select LAN and press [Ok] (or type 2 ).
3. Select Analog modem or LAN .
4. For further modem settings, see How to Set the Analog Modem Parameters on page
157 .
For LAN settings, see How to Set LAN (High-speed Internet) Parameters on page 156
.
155
| Page 155 | | jan-17-2014 02:10 |
8
Configuring your Mailing System
To Next Page
Loading...
Need help?
General
