27
ENGLISH
Fold settings
This screen enables the adjustment of the folding
dimensions.
From the Job Settings screen, select and then
“Edit”. The Fold Settings screen will appear.
The following fold settings are available:
No fold (no settings required)
Single fold
Letter fold
Double parallel fold
Zig-zag fold
The type of selected fold will be displayed on the Job Information screen. For more
information on this screen, see “Job information” on page 22.
• Select or to choose the required fold. When selected, a black box will appear
around the fold setting.
• Select “Edit” to adjust the fold positions. The Fold Positions screen will appear. On this
screen:
- Select “Select” to choose the dotted fold line. See following table for more
information.
- Select or to enter the exact dimension of the fold.
- Select to confirm the changed settings. The Fold Settings screen will re-
appear.
• Select to confirm the changed settings, or press the escape button to return
to the previous screen without changing the settings.
ESC
To Next Page
Loading...
Need help?
General
