Neopost M3000 User Manual

28
Fold positions
Note
The display will indicate when entered positions are out of range.
Optical Mark Recognition (OMR) settings (Option)
For a full function description, see chapter “Optical
Mark Recognition OMR (option)” on page 35.
This screen allows you to enable or disable the OMR
function, and to adjust the basic settings for the
OMR.
From the Job Settings screen, select and then
“Edit”. The OMR1 screen will appear.
• Select “Reading ON” or “Reading OFF” to switch
the OMR on or off.
• Select to confirm the changed settings, or
press the escape button to return to the previous screen without changing the
settings.
If “Reading OFF” was selected, the Job Settings screen will re-appear.
If “Reading ON” was selected, the OMR2 screen will appear.
Fold type Minimum position Maximum position
Single fold 75 mm (2.95”) Longest document length
minus 25 mm (0.98”)
Letter fold First fold 75 mm (2.95”) Longest document length
minus 50 mm (1.97”)
Second fold Position first fold
plus 26 mm (1.02”)
Longest document length
minus 25 mm (0.98”)
Zig-zag fold First fold 75 mm (2.95”) Longest document length
minus 100 mm (3.94”)
Second fold Position first fold
plus 25 mm (0.98”)
Longest document length
minus 75 mm (2.95”)
Double parallel
fold
First fold 75 mm (2.95”) Longest document length
minus 51 mm (2.0”)
Second fold Position first fold
plus 25 mm (0.98”)
Longest document length
minus 25 mm (0.98”)
ESC

Neopost M3000 Specifications

General

Brand	Neopost
Model	M3000
Category	Document Inserting Systems
Language	English