Neoway G2 Series - CAS02-Set Update Frequency of Position Fix; CAS03-Enable or Disable Message Output

G2 & G7A
Commands Manual
Copyright © Neoway Technology Co., Ltd
9
5.4 CAS02- Set Update Frequency of Position Fix
Identifier
CAS02
Description
Set Update Frequency of Position Fix
Type
Input
Format
$PCAS02,fixInt*CS<CR><LF>
Example
$PCAS02,1000*2E
Parameter Description
Field
Name
Format
Parameter Description
1
$PCAS02
Character string
Message ID, sentence header
2
fixInt
Numeric value
Interval between position fix updates, unit: ms
1000=1Hz, 1 position fixed is output every second
500=2Hz, 2 position fixed is output every second
250=4Hz, 4 position fixed is output every second
200=5Hz, 5 position fixed is output every second
100=10Hz, 10 position fixed is output every second
3
CS
HEX numeric
value
Checksum, exclusive OR (no start or stop bits) of
all characters in the sentence, including "," and "^"
delimiters, between but not including the "$" and
the "*" delimiters.
4
<CR><LF>
Character
Carriage return and line feed
5.5 CAS03-Enable or Disable Message Output
Identifier
CAS03
Description
Enable or disable the output of NMEA messages
Type
Input
Format
$PCAS03,nGGA,nGLL,nGSA,nGSV,nRMC,nVTG,nZDA,nANT,nDHV,nLPS,res,res,
nUTC*CS<CR><LF>
Example
$PCAS03,1,1,1,1,1,1,1,1,0,1,0,0,1,0*02
Parameter Description