Neptune Systems COR-15 User Manual

COR User Guide Page 4
❖ 1-1/4” PVC union for use on the COR pump output
❖ 1-1/4” threaded x 3/4” slip fitting for optional hard-piped use on the pump output
❖ 1-1/2” threaded x 1” slip fitting for use on the pump intake when the pump is
plumbed for external use
❖ O-rings for each fitting
❖ 5mm hex wrench
GET TO KNOW YOUR COR DRIVER
The COR-15 and COR-20 driver provides power and speed control to the COR pump.
When connected to an Apex system, the COR driver appears to the Apex as an AquaBus
expansion module, and is managed by the Apex like any other Apex expansion module.
COR Driver Front
COR Driver Back
COR-20 Driver Connections
Pump Speed LEDs
Status LED Panel
Control Buttons
Module Mounting
System
AquaBus Ports
DC Power Jack
1LINK Port
Pump Cable
COR-15 Driver Connections

Neptune Systems COR-15 Specifications

General

Brand	Neptune Systems
Model	COR-15
Category	Water Pump
Language	English