Nescafe barista - Red Error Signals 1;2

18 19
RED ERROR SIGNALS 1/2
Espresso icon: flashing green
Power button: steady red
Remove coee box and insert
it correctly. Close top cover. If
you have diculty to insert back
coee tank, please refer to section
TROUBLESHOOTING, page 21.
Click !
Click !
Coee box not correctly inserted
No water
indicator
light
Mixing chamber
rinsing light
Cleaning light
Error signal lights
Americano icon: flashing green
Power button: steady red
Insert drawer correctly. Push firmly
inside.
Drawer not correctly inserted
RED ERROR SIGNALS 2/2
ERROR SIGNAL: PROCEDURE TO SOLVE THE PROBLEM:
ON
All menu icons: OFF
Power button: fast flashing red
Switch machine o and wait
20minutes. Afterwards switch
machine on. If power button still
flashes red contact support desk.
20 min
OFF
Error has occurred
ERROR SIGNAL: PROCEDURE TO SOLVE THE PROBLEM:
19
1
19
2
Touch Espresso icon. Rinsing process
starts.
Mixing chamber rinsing light:
flashing red
Espresso icon: steady green
Power button: steady red
Remove coee cup and place
container with a capacity of 200 ml
under the coee outlet.
Rinsing mixing chamber required
No water indicator light: flashing red
Power button: steady green
Descale the machine according to
descaling procedure on page 16-17.
Refill water tank and insert it back to
machine correctly. Press green icon
to finish beverage preparation.
Water tank empty /
descaling required
If water tank is EMPTY:
19
1
Descaling
Agent
If water tank is NOT EMPTY:
19
2
Cleaning light: flashing / steady red
All menu icons: steady green
Power button: steady green / red
Clean dosing unit (see page 13-14). Put coee box in place and make a
rinse. Additionally clean mixing chamber, slider cover and drawer (see
page 11-12).
Cleaning light: FLASHING RED
 Cleaning is recommended
Cleaning light: STEADY RED
 Cleaning is required
Coee dust in machine,
cleaning required/recommended