max. 15 bar 1 L
230 V
50 Hz 1460 W
FIRST TIME USE AND INITIAL RINSING
Rinsing starts.
Wait until it stops.
5
6
Put rinsing water in the sink.
5
7
After rinsing is finished all lights are
steady green. Machine is now ready
for use.
5
8
Switch machine on. Power button
starts blinking green while machine is
heating up for approx. 25 seconds.
Power button and Espresso icon light
steady green.
Touch Espresso icon.
5
4
5
5
~25 sec
ON
Place a container with a capacity of
at least 1/4 L under the coee outlet.
Take water tank out.
Put drinking water in the tank. Never
put any liquid other than potable
water in the tank!
5
1
5
2
min.
1/4 L
Re-attach the water tank to the main
body. Plug in the power plug.
CAUTION! Do not handle plug with
wet hands. Plug the machine only into
mains voltage of 230 V - 50 Hz.
5
3
5
i
Before using the machine for
the first time:
• A initial rinse must be done.
• Perform a rinse with water
tank filled to maximum level
(approx. 1 L). Preferably use
soft water.