Nescafe barista - Refilling with Coffee; Coffee Refill Process

10 11
CLEANING - OVERVIEW OF THE PARTS
Water tank connection part
Coee box cap
About the water tank:
Inside the drawer:
Coee box
Magnet (Do not expose to
magnetic sensitive appliances!)
Coee box scraper
Dosing unit (constructed from
the three parts below)
If you touch the protrusion on
the bottom of tank when it
has water in it, the water may
spill from the tank.
Do not touch the protrusion
(connection part) on the bot-
tom of the water tank.
CAUTION!
*No. is engraved on the dosing unit housing
Lower disk
No. 2*
Upper disk
No. 1*
Dosing unit
housing No. 3*
**No. is engraved on the slider cover
To remove the mixing
chamber, pull down on
the lock handle.
Drawer
Slider cover (green) No. 4**
Mixing chamber
lock handle (blue)
High velocity
hot water jet
Mixing
chamber mesh
Mixing chamber
Coee box - do not rinse!
Dosing unit - rinsing OK!
CLEANING DRAWER & MIXING CHAMBER 1/2
Switch machine o.
Unplug power plug.
Pull out the drawer.
11
1
11
2
Press down the blue lock handle.
11
3
Press the slider cover inwards from
the both sides and pull it out. Some-
times the residue hardens, making it
a little bit dicult to remove.
Release the lock under the mixing
chamber.
11
5
11
6
Rinse drawer and slider cover under
hot water.
Wipe with a soft damp cloth.
Soak mixing chamber in hot water
for at least 2 minutes.
If coee is still adhered, scrape it o
gently.
11
7
11
8
Check that the lock handle is down.
Remove the mixing chamber.
11
4
Dry away moisture.
11
9
OFF !
min.
2 minutes
CAUTION! Put none of the parts into a dishwasher!
Cleaning is to be performed when the maintenance icon starts blinking ( ). Regular
maintenance of the machine ensures a better in-cup quality and a longer lifetime.