Nespresso Lattissima Touch - FIRST USE OR AFTER LONG NON-USE; Unpacking and Initial Setup; Rinsing the Water Tank

4 ° C
15 sec.
EN
PREPARING CAPPUCCINO  LATTE MACCHIATO  WARM MILK FROTH
1. Fill the milk container with desired
quantity of milk.
2. Close the milk container. 3. Open the steam connector door by sliding
it to the right.
4. Connect the Rapid Cappuccino System to
the machine.
5. Machine heats up for approximately
15 seconds (blinking lights).
6. Lift the lever completely and insert the
capsule.
INFORMATION: for a perfect milk froth, use skimmed or semi-skimmed milk at refrigerator temperature (about 4° C).
INFORMATION: when the milk container is
empty, before relling, thoroughly rinse it and the
milk aspiration tube with potable water.
INFORMATION: only for Cappuccino
or Latte Macchiato. Skip this step when
preparing a Warm milk froth only.
13
7484_UM_LATTISSIMA_RESTYLE_Z3D.indb 13 19.03.15 09:54