Nespresso Lattissima Touch - Adjusting Settings and Beverage Preparation

3 sec.
3 sec.
EN
INFORMATION: follow the steps 1-8 of section «Preparing Cappuccino and Latte Macchiato».
1. Touch and hold Cappuccino/ Latte Macchiato/ Warm milk froth
button for at least 3 sec. Milk frothing starts. Button blinks fast:
programming mode.
PROGRAMMING QUANTITY FOR CAPPUCCINO  LATTE MACCHIATO  WARM MILK FROTH
3. Touch and hold the same button. Brewing starts. Release
button when desired coee volume is reached. Recipe volume
is now stored for the next preparations. Button blinks 3 times to
conrm the new water volume.
2. Release button when desired milk froth volume is reached.
Button still blinks fast: programming mode. (Cappuccino/Latte
Macchiato). When programming the Warm milk froth beverage,
the programming ends here.
NOTE: please refer to Factory settings section for
min/max programmable quantities.
NOTE: the milk froth volume depends on the kind of
milk that is used, its temperature and the position of the
milk regulator knob.
17
7484_UM_LATTISSIMA_RESTYLE_Z3D.indb 17 19.03.15 09:54