Gig Zero Delay Tap & 10/100/1000BaseT Tap
3
Key Features
Passive, Secure Technology
• Provides passive access at 10/100/1000 Mbps without data stream interfer-
ence or introducing a point of failure
• Unique Zero Delay technology ensures no packet delay or loss if power is
lost to the Tap
• Permanent in-line installation without affecting network performance
• Link Fault Detect prevents undetected link failures
• Passes all full-duplex trafc (including errors) from all layers for compre-
hensive troubleshooting
• No IP address is needed for the Tap or monitoring device, enhancing moni-
toring security
• Redundant power ensures monitoring uptime
• Fully IEEE 802.3 compliant
• Fully RoHS compliant
Ease of Use
• LED indicators show redundant power and link status
• DIP switches select auto-negotiation of xed speed and duplexing settings
for the Tap
• Front-mounted connectors make installation and operation quick and easy
• Optional 19-inch rack frames hold up to 3 or 12 Taps
• Available with -48VDC power
• Tested and compatible with all major manufacturers’ monitoring devices,
including protocol analyzers, probes, and intrusion detection/prevention
systems
Support
• Net Optics offers technical support throughout the lifetime of your purchase.
Our technical support team is available from 8 am to 5 pm Pacic Time,
Monday through Friday at +1 (408) 737-7777 and by e-mail at
ts-support@netoptics.com. FAQs are also available on Net Optics website
at www.netoptics.com.
To Next Page
Loading...
Need help?
General