12
SCREENGUARD
™
INSTALLATION AND USER MANUAL
DESCRIPTION
Control tubes
The PE 8 mm command tubes are factory-installed and do not require any intervention during
installation of the filter.
The control-tube connection scheme below is to be used as reference while troubleshooting the filter.
c
d
f
e
b
h
h
d
e
f
a
g
h
c
b
g
c
h
h
d e
f
h
a
Legend
a.
From the hydraulic valve to the filter hydraulic piston cap.
b.
From the filter inlet pressure point to the pressure gauge 3-way valve.
c.
From the filter outlet to the hydraulic valve.
d.
From the filter outlet to the Aquative solenoid.
e.
From the pressure gauge 3-way valve to the flush controller PD sensor high-pressure connection port (right).
f.
From the filter outlet to the flush controller PD sensor low-pressure connection port (left).
g.
From the Aquative solenoid to the hydraulic valve.
h.
Drain tube (no more than 2 meter long each).
To Next Page
Loading...
