SCREENGUARD
™
INSTALLATION AND USER MANUAL
27
MAINTENANCE
Replacing the batteries in the Bluetooth flush controller
The controller is powered by 4 x 1.5v C-size batteries (6v DC):
1.
Open the flush controller box using a cross-head
screwdriver.
2.
Extract the batteries.
1
1
1
1
2
3.
Insert a set of 4 new batteries (
Match the poles to
the markings
inside the battery housing).
The controller should turn on automatically.
3 short beeps followed by a long one should be
heard.
NOTE
Always replace the whole set of 4 batteries. Never use new and old batteries together.
4.
Close the flush controller box (mind the
alignment of the cover gasket to ensure sealing).
16
16
16
16
To Next Page
Loading...
