1. Log in to the Link-Live web site.
2. Open the left-side navigation drawer by
clicking the menu icon , and then select
Support > Software Downloads.
3. Locate and select the update file for your
unit. The file name is in the
format:<product name abbreviation>-ota-
user.zip.
4. Save the update file to a PC.
Updating the System Software
Reference Buttons and Ports if needed.
1. From your PC, copy the .zip file to a FAT32-
formatted Type A USBdrive, and then insert
the drive into your CyberScope Air.
2. Power off your CyberScope Air unit.
3. Press and hold the Volume Up button, and
then press the Power button. Continue to
hold the Volume Up button until the
Recovery screen appears. (You can release
the Volume Up button a few seconds after
this screen appears.)
Software Management
123
To Next Page
Loading...