2. Toggle the Wi-Fi button to On/Enabled.
3. Tap Wi-Fi to view available networks.
4. Scroll down to and then select the SSID of
the enterprise server you wish to connect to
using WPA2-E (for example, TEST-Ruckus-
WPA2-E).
5. Configure the following WPA2-E options in
the pop-up dialog:
l
EAP method: PEAP
l
Phase 2 authentication:MSCHAPV2
l
CA certificate:(use whatever name you
chose for your CAcertificate, for
example, CA FreeRadius self-signed)
l
Online Certificate Status: Do not
validate
l
Domain:(enter the Common Name
recorded above, for example, Example
Server Certificate)
l
Identity:(enter whatever test user name
was set up for the server, for example,
entuser1)
Home and System Interface
59
To Next Page
Loading...