netAlly CyberScope Air - Page 60

l
Anonymous identity:(leave blank)
l
Password:(enter the password set up for
the server)
6. Tap the CONNECT button to apply settings
and close the configuration page.
7. Verify that the test SSID appears at the top
of the list with a status of Connected.
Import the Client Certificate
NOTE:Applies to EAPTLSonly.
1. Obtain a client certificate in .p12 format. Be
sure it includes the private key.
NOTE: Although the imported CA certificate
is a .pem file, NetAlly recommends a .p12
file format for the client certificate. Below is
a sample openssl command to convert a
client certificate from .pem to .p12 format:
<path_to_openssl_bin>\openssl.exe
pkcs12 -legacy -provider-path
<openssl_path>/providers -export
-inkey <privateKey>.key
-in <client_cert>.pem
-out <client_cert>.p12
Home and System Interface
60