NetApp DS2246 User Manual

7. Slide the equipment onto the telco tray until the brackets on the chassis meet the rack posts, and then secure the brackets to
the rack posts with six of the appropriate size and type mounting screws matching the threading of your rack.
8. If applicable, replace the end caps.
9. See the appropriate installation or upgrade guide to complete the setup of the new shelf.
Documentation can be found on the NetApp Support Site.
mysupport.netapp.com > Documentation > A-Z Documentation
Installing 2U equipment into a two-post rack
3

NetApp DS2246 Specifications

General

Data transfer rate	6 Gbit/s
Storage drive size	2.5 \
Storage drive interface	Serial Attached SCSI (SAS)
Storage drives installed	Yes
Installed storage drive type	HDD
Supported storage drive types	HDD & SSD
Total installed storage capacity	19.6 TB
Maximum supported storage capacity	- TB
Number of storage drives installed	24
Chassis type	Rack (2U)
Product color	Black
Device class	Large Enterprise Business
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Number of power supply units	2
Operating altitude	0 - 3045 m
Non-operating altitude	-305 - 12192 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	484 mm
Width	480 mm
Height	85 mm