NetApp E Series Install

Install and set up 60-drives
Prepare for installation
Learn how to prepare to install your E2860, E5760, or DE460 series storage system.
Steps
1. Create an account and register your hardware at
mysupport.netapp.com.
2. Ensure that the following items are in the box that you received.
Shelf, bezel, and rackmount hardware
Shelf handles x4
The following table identifies the types of cables you might receive. If you receive a cable not listed in the
table, see
Hardware Universe to locate the cable and identify its use.
Connector type Cable type Use
Ethernet cables
(if ordered)
Management connection
I/O cables
(if ordered)
Cabling the data hosts
1

NetApp E Series Specifications

General

Form Factor	2U, 4U
Drive Types	SSD
Host Interface	SAS, iSCSI, FC, IB
RAID Levels	RAID 0, 1, 5, 6, 10
Operating System Compatibility	Windows, Linux, VMware
Management Software	SANtricity