DSL
The DSL page allows you to select the modulation, the phone line pair and the capability.
Select applicable DSL service settings required for your xDSL service and click Apply/Save to save the new DSL service settings.
You can also configure the DSL test mode which can improve your DSL connection speeds or throughput. Select the DSL test
mode applicable to your DSL service.
Click Apply/Save to save the new DSL test mode configuration settings.
As part of configuring the DSL test mode, you can also manually select which tone frequencies the NB604N will use when
establishing a connection to a DSL service. Click ‘Tone Selection’ and enable or disable the applicable frequencies. By default, all
frequencies are enabled.
Click Apply to save the new Tone selection configuration settings.
To Next Page
Loading...
Need help?
General
