NB604N – ADSL2+ Wireless N300 Modem Router
NetComm NB604N – ADSL2+ Wireless N300 Modem
Router
Integrated Interfaces
The following integrated interfaces are available on the NB604N:
Attach a telephone line with an active xDSL service here.
Press this button to enable or disable the WiFi function of the NB604N.
Hold this button down for 10 seconds or more to reset the NB604N to factory defaults.
Press this button to enable the WPS push-button connect function.
Attach Ethernet based devices to these RJ-45 ports.
Attach an external USB storage device to share content with connected devices.
Power connector, connects to a DC 12V 1.5A Power Adapter.
Turn the NB604N on or off with this switch.
To Next Page
Loading...
Need help?
General
