NetComm NF10W - NAT; Port Triggering

32
NetComm Wireless NF10W User Guide
www.netcommwireless.com
v1.1
FIELD
DESCRIPTION
Select a Service or custom
Server
Select a pre-configured port forwarding rule or choose custom server to create your own port
forwarding rule.
Server IP Address
Enter the IP address of the local server.
External Port Start
Enter the starting external port number (when custom server is selected). When a service is connected
this field will be completed automatically.
External Port End
Enter the ending external port number (when custom server is selected). When a service is connected
this field will be completed automatically.
Protocol
Options include TCP, UDP or TCP/UDP.
Internal Port Start
Enter the starting internal port number (when custom server is selected). When a service is connected
this field will be completed automatically.
Internal Port End
Enter the ending internal port number (when custom server is selected). When a service is connected
this field will be completed automatically.
Click Save/Apply to save your settings when you have finished creating virtual servers.
Port Triggering
Some applications require specific ports in the Router’s firewall to be open for access by remote parties. Port Triggering opens up
the ‘Open Ports’ in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the
‘Triggering Ports’.
The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using
the ‘Open Ports’. A maximum 32 entries can be configured.
To add a Trigger Port, press the Add button.