NTC-220 Series Router – Firmware Upgrade Guide
FI01138 v. 1.0 April 2019
7 Once the file has been uploaded and validated, you will be advised that it was successful and that the
system will now reboot:
Click the
OK button to proceed with the reboot.
8 During the rebooting process, a progress indicator displays.
9 When the reboot is complete you will be returned to the login page.
Confirm firmware upgrade
1 In the Username field, select root and enter the password for the device in the Password field, then click the
Log in button.
2 The
Status page will display. go to the System information section and note the Firmware version in the
Device version section:
To Previous Page
Loading...
Need help?
General
