Security Gateway Manual Netgate-2100
Fig. 2: An example of using PuTTY in Linux
GNU screen
In many cases screen may be invoked simply by using the proper command line, where <console-port> is the
console port that was located above.
$ sudo screen <console-port> 115200
Note: The sudo command will prompt for the local workstation password of the current account.
If portions of the text are unreadable but appear to be properly formatted, the most likely culprit is a character encoding
mismatch in the terminal. Adding the -U parameter to the screen command line arguments forces it to use UTF-8
for character encoding:
$ sudo screen -U <console-port> 115200
© Copyright 2023 Rubicon Communications LLC 34
To Next Page
Loading...
