NETGEAR AC1450

NETGEAR genie Basic Settings
20
AC1450 Smart WiFi Router
Internet Setup
The Internet Setup screen is where you view or change basic ISP information.
Note: You can use the Setup Wizard to detect the Internet connection and
automatically set up the router. See Internet Connection Setup
Wizard on page 31.
 To view or change the basic Internet setup:
1. From the Home screen, select Internet.
Scroll to
view more
settings
The fields that display in the Internet Setup screen depend on whether your Internet
connection requires a login.
2. Select one of the following radio buttons:
• Ye
s. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
• No. Enter the account and domain names, only if needed.
3. Enter the settings for the IP address and DNS server
.
The default settings usually work fine. If you have problems with your connection, check
the ISP settings.
4. Click Apply.
Your settings are saved.
5. Click T
est to test your Internet connection.
If the NETGEAR website does not display within 1 minute, see Chapter 10,
Troubleshooting.