NETGEAR Arlo Q

27
Use an SD Card With Arlo Q Plus
The Cameras page displays.
3. Click or tap Settings > My Devices.
A list of cameras displays.
4. Click or tap the camera.
The camera settings display.
5. In the Storage section, click or tap SD Card.
The SD Card page displays.
6. Click or tap Format SD Card.
The SD card is formatted.
Turn SD Card Recording O and On
¾ To turn SD card recording o and on:
1. Insert the SD card into the SD slot on the Arlo Q Plus camera.
For more information, see Insert an SD Card on page 23.
2. Tap the Arlo icon
on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Cameras page displays.
3. Click or tap Settings > My Devices.
A list of cameras displays.
4. Click or tap the camera.
The camera settings display.
5. In the Storage section, click or tap SD Card.
The SD Card page displays.
6. Click or tap SD Card Reording.
SD card recording toggles o and on.