NETGEAR Arlo Q

35
Modes, Rules, and Smart Alerts
5. Click or tap Edit next to the rule that you want to edit.
6. Under If the following, click or tap Edit
next to Motion is detected.
The Motion detection settings page displays.
7. Move the slider to adjust the sensitivity level for motion detection for this
camera.
If you used a mobile device to specify the settings, your settings are saved.
8. If you used a browser to specify the settings, click Save.
Your settings are saved.
Change Audio Sensitivity
¾ To change audio sensitivity for a camera:
1. Tap the Arlo icon
on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Cameras page displays.
2. Click or tap Mode.
A list of cameras displays.
3. Click or tap the Arlo Q camera.
A list of modes displays.
4. Click or tap Edit
next to Armed.
The Edit Rule page displays.