NETGEAR Arlo Q

Settings
47
2. Click or tap Settings > My Devices.
A list of cameras displays.
3. Click or tap the camera.
The camera settings display.
4. Click or tap Status Light.
If you are using a mobile device, your settings are saved.
5. If you are using a computer, click Save.
Your settings are saved.
Video Settings
Change the Video Resolution
The default video resolution is 720P. You can change this setting to a higher or
lower resolution. Decreasing the resolution of Arlo Q videos reduces the required
WiFi bandwidth.
¾ To change the video resolution:
1. Tap the Arlo icon
on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Cameras page displays.
2. Click or tap Settings > My Devices.
A list of cameras displays.
3. Click or tap the camera.
The camera settings display.
4. If you are using the Arlo App on a mobile device, tap Video Settings.
The Video Settings page displays.
5. Click or tap Video Resolution.
The Video Resolution page displays.