NETGEAR Arlo Q

34
Modes, Rules, and Smart Alerts
2. Click or tap Mode.
A list of cameras displays.
3. Click or tap the Arlo Q camera.
The Mode page displays.
4. Click or tap a mode to activate it.
The mode that you selected turns on immediately. The mode stays active until
you change it.
When you view the Cameras page, the icons that display at the top of the camera
feed are based on the currently selected mode.
Motion. Motion detection is on.
Sound. Audio detection is on.
Change Motion Sensitivity
You can easily change the sensitivity level for Arlo Q cameras.
¾ To change the sensitivity level for a camera:
1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Cameras page displays.
2. Click or tap Mode.
A list of cameras displays.
3. Click or tap the Arlo Q camera.
The Mode page displays.
4. Click or tap Edit
next to the mode.
The Edit Rule page displays.