NETGEAR Arlo Q

Settings
50
6. To change the speaker volume, move the Speaker Volume slider.
Your settings are saved.
Change the WiFi Network
¾ To change the WiFi network that Arlo connects to:
1. Tap the Arlo icon
on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Cameras page displays.
2. Click or tap Settings > My Devices.
A list of cameras displays.
3. Click or tap the camera.
The camera settings display.
4. Click or tap SSID.
The Connect Network page displays.
5. Enter the WiFi network name and password.
6. Click or tap Continue.
7. Follow the prompts to connect your Arlo Q camera to the WiFi network.
If you are using a mobile device, your settings are saved.
8. If you are using a computer, click Save.
Your settings are saved.
View Device Information
¾ To view device information:
1. Tap the Arlo icon
on your mobile device.