NETGEAR Arlo Q

7
Set Up Your System
2. Connect the other end of the micro USB cable to the power adapter.
3. Plug the USB adapter into a wall socket and wait for the camera LED to blink
amber.
4. Continue installing your camera.
For more information, see Set Up a New Camera on page 8.
Connect an Arlo Q Plus Camera With PoE
¾ To connect an Arlo Q Plus with PoE:
1. Connect the PoE adapter to the camera.
2. Connect your own Ethernet cable to the PoE adapter.
3. Connect the other end of the Ethernet cable to your PoE switch.
4. Continue installing your camera.
For more information, see Set Up a New Camera on page 8.