NETGEAR AX1600 User Manual

To log in to the extender:
1.
Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•
If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•
If you enabled the One WiFi Name feature, enter one of the following URLs:
-
Windows-based computers. http://mywifiext.local/ or http://mywifiext/
-
Mac computers and iOS devices. http://mywifiext.local/
-
Android devices. http://<extender’s IP address> (for example,
http://192.168.1.3)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 65.
Run the Smart Setup installation
You can use the Smart Setup to change the extender settings. This is an easy way to
connect the extender to a different router or to change the extender WiFi network name
(SSID) or WiFi password.
To run the Smart Setup:
1.
Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•
If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•
If you enabled the One WiFi Name feature, enter one of the following URLs:
-
Windows-based computers. http://mywifiext.local/ or http://mywifiext/
-
Mac computers and iOS devices. http://mywifiext.local/
-
Android devices. http://<extender’s IP address> (for example,
http://192.168.1.3)
-
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 65.
A login page displays.
User Manual20Get started
AX1600 4-Stream WiFi 6 Mesh Extender

NETGEAR AX1600 Specifications

General

WiFi Performance	AX1600
MU-MIMO	Yes
OFDMA	Yes
Beamforming	Yes
WiFi Technology	802.11ax
WiFi Band	Dual Band
Ethernet Ports	1 x Gigabit Ethernet
Antennas	Two (2) internal antennas
Security	WPA3