•
If you enabled the One WiFi Name feature, enter one of the following URLs:
-
Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-
Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-
Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 65.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4.
If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. In the 2.4 GHz or 5 GHz Network section, clear the Broadcast the Network Name
(SSID) check box.
7. Click the SAVE button.
Your settings are saved.
Disable or enable the WiFi radios
By default, the extender’s WiFi radios broadcast signals in the 2.4 GHz and 5 GHz bands.
If you disable the WiFi radios, then no one can connect with WiFi to the extender.
To enable or disable the WiFi radios:
1.
Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•
If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
User Manual31Extender Network Settings
AX1600 4-Stream WiFi 6 Mesh Extender
To Next Page
Loading...
Need help?
General
