NETGEAR C6300

Specify Initial Settings
19
AC1750 WiFi Cable Modem Router
• If the modem router is not visible, your cable Internet provider can give you
instructions to verify why the modem router does not connect with your high-speed
Internet service.
• If the modem router
is
visible to your cable Internet provider, reboot the computer,
laptop, or home gateway that is connected to the modem router. Try checking your
online status again.
Specify the Cable Connection Starting Frequency
The starting frequency is automatically generated. For most Internet connections, you do not
need to specify this information. If you need to enter a starting frequency, contact your
Internet provider.
 To change the starting frequency:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or http://192.168.0.1.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin
.
The default password is password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select Cable Connection.
5. In the Starting Frequency field, type a number.
6. Click the Apply button.
Your settings are saved.