NETGEAR C6300

Manage Your Network
77
AC1750 WiFi Cable Modem Router
Run the Traceroute Utility
To display the route and measure transit delays of packets across an IP, run the traceroute
utility.
 To run a traceroute test:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://routerlogin.net or http://192.168.0.1.
A login screen displays.
3. Enter the
modem router user name and password.
The user name is admin.
The default password is password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Diagnostics
.
5. In the Utility list, select Traceroute.
6. Specify the following parameters:
• Target. The IP address or host name of the computer you are tracing.
• Max Hops. The maximum number of hops to allow when tracing the route.
• Data Size. The input the size (in bytes) of the packet.
• Base Port. The port number to send the packet to.
• Resolve Host. Select
On to resolve the host name to the IP address.
7. Click the Start T
est button.
The traceroute results display
.
To clear the results from the display, click the Clear Results button.