Supplemental Information
98
AC1750 WiFi Cable Modem Router
Technical Specifications
The following table describes the technical specifications for the modem router.
Table 5. Technical specifications
Feature Specification
Network protocol and
standards compatibility
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay, NAT
(many-to-one),
TFTP client, VPN passthrough (IPSec, PPTP)
Power adapter • North America:
120V,
60 Hz, input
• All regions (output): 12 VDC @ 3.5A output 42W maximum
Physical specifications • Dimensions: 10.94 x 6.85 x 2.96 in. (277.88 x 173.99 x 75.18 mm)
• W
eight: 1.52 lb (0.69 kg)
Environmental • Operating temperature: 32° to 104°F (0° to 40°C)
• Operating humidity: 90% maximum relative humidity
, noncondensing
• Electromagnetic emissions: Meets requirements of: FCC Part 15 Class B.
Interface Local: 10BASE-T, 100/1000BASE-Tx, RJ-45
802.1
1a/n/g/b/ac
Internet: DOCSIS 3.0. Downward compatible with DOCSIS 2.0, 1.1 and 1.0
Wireless
(continued)
Authentication type Open System
Wireless Card Access List All wireless stations allowed
1. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, may lower actual data throughput rate.
Table 4. Factory default settings (continued)
Feature Default Setting
To Previous Page
Loading...
