NETGEAR C6300 User Manual

Supplemental Information
97
AC1750 WiFi Cable Modem Router
Factory Default Settings
To return the modem router to its factory settings, press and hold the Reset button for over
seven seconds. The modem router resets and returns to the factory configuration settings
shown in the following table.
Table 4. Factory default settings
Feature Default Setting
Modem router
login
User login URL http://192.168.0.1
User name and password
(case-sensitive)
admin / password
Local network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
Firewall Inbound communication from the
Internet
Disabled (except traffic on port 80, the HTTP port)
Outbound communication to the
Internet
Enabled (all)
Source MAC filtering Disabled
Internet
connection
WAN MAC address Use default hardware address
Wireless Wireless communication Enabled
SSID name As shown on the product label
Security WPA/WPA2.. The default WPA/WPA2 passphrase is
on the product label.
Broadcast SSID Enabled
Transmission speed Auto
1
Country/region United States in the US; otherwise varies by region
RF channel Auto
Operating mode a, n, g, b, and ac
Data rate Best
Output power Full
Access point Enabled

NETGEAR C6300 Specifications

General

DSL WAN	Yes
Ethernet WAN	-
SIM card slot	No
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	450 Mbit/s
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	4
Processor frequency	600 MHz
Cables included	LAN (RJ-45)
Product type	Tabletop router
Product color	Black
Power source type	DC

Weight and Dimensions

Depth	174 mm
Width	277.9 mm
Height	75.18 mm
Weight	690 g