Control Access to the Internet
32
AC1750 WiFi Cable Modem Router
You might be able to find this information in the configuration screen of your email
program. If you leave this field blank, log and alert messages are not sent.
7. Enter the email address to which logs and alerts are sent in the Send to This E-mail
Address field.
This email address is also used for the From address. If this field is blank, log and alert
messages are not sent.
8. If your outgoing email server requires authentication, select the My Mail Server requires
authentication check box.
a. In the User Name field, type the user name for the outgoing email server
.
b. In the
Password field, type the password for the outgoing email server.
9. To send alerts when someone attempts to visit a blocked site, select the Send Alerts
Immediately
check box.
10. To send logs based on a schedule, specify these settings:
• From
Send logs according to this schedule drop-down list, select the schedule
type.
• From the Day drop-down list, select the day.
• From the
Time drop-down list, select the time, and select the
am or pm radio button.
11. Click the Apply button.
Your settings are saved.
Logs are sent according to the schedule that you set. If the log fills up before the specified
time, it is sent.
After the log is sent, it is cleared from the modem router memory
. If the
modem router cannot email the log and the log buffer fills up, the modem router
overwrites the log.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
