Name: NETGEAR C6300
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Share a USB Drive Attached to the Modem Router

AC1750 WiFi Cable Modem Router

4. Select ADVANCED > USB Storage > Advanced Settings.

5. Specify access to the USB storage device:

• Network Device Name. This is the name used to access the USB device connected

to the modem router. The default is readyshare.

• Workgroup. If you are using a Windows workgroup rather than a domain, the

workgroup name is displayed here. The name works only in an operating system that

supports NetBIOS, such as Microsoft Windows.

• Access Method

. Select the access methods:

- Network Neighborhood/MacShare. Enabled by default.

- HTTP. Enabled by default.

You can type

http://readyshare.routerlogin.net/shares to access the USB drive.

- HTTP (via Internet). Disabled by default. If you enable this feature, remote users

can type http://<public IP address/shares> (for example, http://1.1.10.102/shares)

or a URL domain name to access the USB drive over the Internet. This feature

supports file uploading only.

- FTP. Disabled by default.

- FTP (via Internet). Disabled by default. If you select this check box, remote users

can access the USB drive through FTP over the Internet.

This feature supports

both downloading and uploading of files.

6. Click the Apply button.

our changes are saved.

Other manuals for NETGEAR C6300

Questions and Answers:

Need help?

Do you have a question about the NETGEAR C6300 and is the answer not in the manual?

General