Name: NETGEAR C6300
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Specify Network Settings

AC1750 WiFi Cable Modem Router

The user name is admin. The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADVANCED > Setup > WAN Setup

5. In the MTU Size field, enter a value from 64 to 1500.

6. Click the Apply button.

Your change is saved.

If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are

willing to experiment, you can gradually reduce the MTU from the maximum value of 1500

until the problem goes away

. The following table describes common MTU sizes and

applications.

Table 2. Common MTU sizes

MTU Application

1500 The largest Ethernet packet size. This setting is typical for connections that do not use

PPPoE or VPN, and is the default value for NETGEAR modem routers, adapters, and

switches.

1492 Used in PPPoE environments.

1472 Maximum size to use for pinging. (Larger packets are fragmented.)

1468 Used in some DHCP environments.

1460 Usable by AOL if you do not have large email attachments, for example.

1436 Used in PPTP environments or with VPN.

1400 Maximum size for AOL DSL.

576 Typical value to connect to dial-up ISPs.

Other manuals for NETGEAR C6300

Questions and Answers:

Need help?

Do you have a question about the NETGEAR C6300 and is the answer not in the manual?

General