Name: NETGEAR C6300
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Specify Internet Port Settings

AC1750 WiFi Cable Modem Router

The user name is admin. The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADVANCED > Advanced Setup > Port Forwarding/Port T

riggering.

5. Select the Port Triggering radio button.

6. Click the Add Service button.

7. In the Service Name field, type a descriptive service name.

8. From the Service User list, select a user option:

• Any (the default) allows any computer on the Internet to use this service.

• Single address restricts the service to a particular computer. Y

ou must enter the IP

address of the computer to which you want to grant access.

9. From the Service Type list, select a service.

If you are not sure, select

TCP/UDP.

10. In the Triggering Port field, enter the number of the outbound traffic port that will open the

inbound ports.

Other manuals for NETGEAR C6300

Questions and Answers:

Need help?

Do you have a question about the NETGEAR C6300 and is the answer not in the manual?

General