Manage Your Network
29
NETGEAR Wireless Cable Gateway
• To restore the saved configuration settings from a backup file, click Browse, locate
and select the previously saved backup file. Then click Restore.
A message notifies you when the gateway has been restored to previous settings. Then, the
gateway restarts, which takes about one minute.
Note: When restoring configuration settings, do not interrupt the process
by going online, turning off the gateway, or shutting down the
computer.
Event Log
The gateway logs security-related events such as denied incoming service requests and
hacker probes.
1. Select Maintenance > Event Log.
2. To clear the log, click Clear Log; to refresh the log, click Refresh.
To Next Page
Loading...
Need help?
General