NETGEAR CG3100 User Manual

Technical Specifications
50
NETGEAR Wireless Cable Gateway
Factory Default Settings
You can return the gateway to its factory settings. On the bottom of the gateway, press and
hold the Restore Factory Settings button for over 7 seconds. The gateway resets, and
returns to its factory settings.
Your device will return to the factory configuration settings
shown in the following table.
Factory Default Settings
Gateway Login User login URL http://192.168.1.1
User name and password (case
sensitive)
admin/password
Local Network
(LAN)
LAN IP 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 192.168.1.2
DHCP Ending IP address 192.168.1.254
Firewall Inbound communication from the
Internet
Disabled (except traffic on port 80, the http port)
Outbound communication to the
Internet
Enabled (all)
Source MAC filtering Disabled
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500

NETGEAR CG3100 Specifications

General

Brand	NETGEAR
Model	CG3100
Category	Gateway
Language	English